Aquafire HP coating system is designed for application by shopfitters and contractors where a very high standard of finish is required in areas that have to comply with the fire protection reqirements of the Building Regulations.

The Aquafire HP System comprises a two-pack water based intumescent lacquer followed (when dry) by a two-pack topcoat which is available in Gloss, Semi Matt and Matt finishes.

Suitable for use on timber based products including softwoods, hardwoods and veneered or plain chipboard and medium density fibreboard (MDF).

Provides Class 1 Surface Spread of Flame (BS 476:Part 7:1987) and Class 0 Fire Propagation (BS476:Part 6:1991) requirements of the Building Regulations.

Satisfies the heavy/severe use requirement of BS 6250:Part 3:1991 for horizontal surfaces.

REPORT NUMBER	TESTING HOUSE	SUBSTRATE MATERIAL	TEST TYPE	TEST RESULTS	BUILDING REGULATION CLASSIFICATION
TE85634 TE85639	LPC	MDF	#1 #2	PASS CLASS 1	CLASS 0
TE85635 TE85640	LPC	LIGHT OAK	#1 #2	PASS CLASS 1	CLASS 0
TE85636 TE85641	LPC	MAHOGANY	#1 #2	PASS CLASS 1	CLASS 0
TE85637 TE85642	LPC	VENEERED CHIPBOARD	#1 #2	PASS CLASS 1	CLASS 0
TE85638 TE85643	LPC	VENEERED MDF	#1 #2	PASS CLASS 1	CLASS 0

TEST TYPES: Test type #1 - Test to BS476: Part 6: 1989. Class 0. Test Type #2 - Test to BS476: Part7: 1987 Class 1

IF IN ANY DOUBT, CALL AQUAFIRE SYSTEMS TECHNICAL SERVICES: +44 (0)131 551 6551