 |
AQUAFIRE HP SYSTEM
|
Basecoat
|
A two-pack water based intumescent lacquer: Aquafire HP Basecoat.
|
Topcoat
|
A two-pack solvent based acid catalysed lacquer: Aquafire HP Topcoat.
|
Finish
|
Basecoat: Gloss
|
 |
Topcoat: Available in Gloss, Semi Mat, and Matt.
|
Cure
|
Basecoat: Chemical and air drying.
|
 |
Topcoat: Chemical and air drying.
|
Touch Dry
|
1 hour
|
Dry:
|
4-6 hours
|
Hard Dry:
|
24 hours
|
Full Cure
|
7 days (All @ 20°C & 50% Relative Humidity)
|
Full Cure
|
30 minutes (@ 20°C & 50% Relative Humidity)
|
Flash Point
|
Basecoat: None. Water based.
|
 |
Topcoat: 21°C (highly flammable)
|
Thinner
|
Neither Basecoat or Topcoat should be thinned.
|
Cleaner
|
Basecoat: Water, preferably warm, as soon as possible after use.
|
 |
Topcoat: Good quality cellulose thinner.
|
|
As the Company has no control over the method or conditions of applications of the products, no liability will be accepted for any loss, damage or physical injury resulting from the use or application of the information, data or products mentioned or referred to herein.
Aquafire Systems is a division of Caledonian UK Ltd
|