A door kit provides sufficient materials to coat a traditional panel door (7' x 3) both faces, all edges (doors and frames) and facings. Available in a Satin or Matt finish,
Aquafire Systems will supply on request an application certificate detailing site, contractor, number of door kits supplied. On completion, the certificate is signed by the Contractor. Labels which indicate that Aquafire FRC has been applied are also available.
TECHNICAL INFORMATION
 |
BASECOAT
|
TOPCOAT
Matt and Gloss
|
No. of components
|
Single unit
|
Single unit
|
Solids by volume
|
56%
|
35%
|
Drying times
|
 |
 |
Touch dry
|
1 hour
|
1 hour
|
Hard dry
|
4-6 hours
|
4- 6 hours
|
Overcoating
|
12 hours (min)
|
12 hours (min)
|
The Aquafire materials must be stored frost free, The Aquafire FRC materials are supplied ready for use after stirring thoroughly and should not be thinned. Brushes, rollers and spray equipment should be washed out in warm water immediately after use.
For the best results with Aquafire FRC we recommend:-
1. Before application, ensure that the
substrate is dry and free from
contamination and any residue from
the stripping of previous coatings is
completely removed.
2. All equipment is washed out
occasionally during use in order to
reduce build-up.
During application the coatings are
not overbrushed.
Before applying subsequent coats,
ensure that the previous coat is dry.
DOOR KITS
A door kit provides sufficient materials to coat a traditional
panel door (7' x 3'), all edges and facings.
Treatment identity labels available on request
For further Information call
0131 440 4450
|