AQUAFIRE SYSTEMS
INTUMESCENT FIRE PROTECTION COATINGS FOR TIMBER
AQUAFIRE FRC  -  AQUAFIRE HP  -  AQUAFIRE DOORKITS
APPLICATION INFORMATION   |   FIRE PERFORMANCE DATA   |   COLOUR APPLICATION DATA   |   CLEAR APPLICATION DATA   |   BUILDING REGULATION GUIDE
COLOUR APPLICATION DATA
APPLICATION RATE

BASECOAT
TOPCOAT
EMULSION
TOTAL DFT
150 microns
60 microns
135 microns
COVERAGE
380 g/sq.m
207 g/sq.m
380 g/sq.m
TOUCH DRY
1 hour
1 hour
30 mins
HARD DRY
4-6 hours
4-6 hours
2 hours

Aquafire FRC is a special fire protection coating system and must be applied in accordance with the manufacturers instructions.
To achieve the loadings required it may be necessary to apply the basecoat in more than two coats.

Aquafire FRC materials must be stored frost free.

Aquafire FRC materials are supplied ready for use after stirring thoroughly and should not be thinned. The substrate must be completely dry and free from contamination before application. Brushes, rollers and spray equipment should be washed out with warm water immediately after use.

For further information contact:
AQUAFIRE SYSTEMS
TECHNICAL SERVICES DEPARTMENT
0131 440 4450
For further information